The EPEVER Tracer AN Series Photo voltaic Demand Controller can be a really efficient solar controller made for off-grid solar programs. Dependant on multiphase synchronous rectification engineering, it assures optimized Strength conversion and process security for a wide array of photovoltaic (PV) purposes.
Vital Features of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Photo voltaic Cost Controller know-how for remarkable photo voltaic Electricity harvesting. Vital options include:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Advanced MPPT Algorithm with >99% performance.
Twin-Phase Charging for Increased battery everyday living.
Liquid crystal display Exhibit with authentic-time facts monitoring.
Many Load Regulate Modes which include handbook and timer.
Detailed Digital Protections from overcharging, above-discharging, limited circuits, and reverse polarity.
Phase-by-Stage Manual to Establishing the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Be certain all parts are involved: Tracer AN device, temperature sensor, conversation cables, and user manual.
Validate the design variety and voltage rankings match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Choose a very well-ventilated, dry spot close to the battery bank.
Safe the Tracer AN controller using the offered mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Warning: Constantly stick to proper protection protocols and make sure the technique is powered off before connecting parts.
Phase 1: Connect the battery terminals towards the demand controller (beneficial to constructive, detrimental to adverse).
Stage two: Hook up the solar panel array to the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity around the controller by connecting the battery to start with.
Make use of the LCD Exhibit to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, light Command.
5. Checking and Facts Logging
The Tracer AN Sequence supports true-time checking utilizing the MT50 remote meter.
Data is usually logged by using the RS485 conversation port using application like Photo voltaic Station PC.
Remote checking is possible Together with the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Concern one: No Energy Output
Examine battery voltage and connections.
Validate PV panel visit here voltage exceeds battery voltage.
Problem 2: About-Voltage Protection
Confirm the photo voltaic array’s voltage ranking.
Adjust process parameters if essential.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations in the menu.
Benefits of the Tracer AN Sequence with MSR Technological know-how
The multiphase synchronous rectification technologies makes certain:
Higher Efficiency: Diminished Electricity losses through conversion.
Enhanced Reliability: Secure general performance less than variable hundreds.
More time Battery Life: Steady and correct charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification know-how can be an exceptional option for optimizing solar energy technology and increasing battery lifetime. By next the above mentioned set up guideline, buyers can be certain most performance and procedure longevity.