The EPEVER Tracer AN Sequence Solar Cost Controller is actually a remarkably efficient solar controller designed for off-grid solar techniques. Based upon multiphase synchronous rectification technologies, it guarantees optimized Electricity conversion and method steadiness for a wide array of photovoltaic (PV) apps.
Crucial Attributes of the EPEVER Tracer AN Collection Controller
The Tracer AN sequence utilizes EPEVER Photo voltaic Cost Controller technologies for remarkable photo voltaic Vitality harvesting. Key attributes contain:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Innovative MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for enhanced battery lifetime.
Liquid crystal display Display with real-time information monitoring.
Multiple Load Control Modes including manual and timer.
Comprehensive Digital Protections versus overcharging, about-discharging, shorter circuits, and reverse polarity.
Move-by-Action Tutorial to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all factors are bundled: Tracer AN device, temperature sensor, conversation cables, and user manual.
Validate the product number and voltage scores match your solar panel and battery specs.
2. Mounting the Demand Controller
Decide on a well-ventilated, dry area close to the battery bank.
Protected the Tracer AN controller utilizing the furnished mounting brackets.
Keep suitable clearance for heat dissipation.
three. Wiring the Solar Charge Controller
Caution: Normally follow good basic safety protocols and ensure the system is run off ahead of connecting elements.
Step one: Join the battery terminals to the demand controller (optimistic to good, negative to detrimental).
Phase 2: Hook up the solar panel array to the PV enter terminals.
Stage 3: Hook up the load terminals if using a immediate load link.
Step four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electrical power on the controller by connecting the battery to start with.
Make use of the LCD Exhibit to navigate the settings menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Regulate.
5. Monitoring and Knowledge Logging
The Tracer AN Series supports authentic-time checking using the MT50 distant meter.
Information is usually logged through the RS485 communication port working with computer software such as Photo voltaic Station PC.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Frequent Challenges
Concern one: No Electricity Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue 2: Over-Voltage Safety
Validate the solar array’s voltage ranking.
Modify process parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Increased Performance: Lowered Electricity losses throughout conversion.
Increased Reliability: Steady effectiveness under variable masses.
Longer Battery Daily life: Dependable and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is an Extraordinary option for optimizing solar energy era and increasing battery life. By adhering to the above mentioned set up manual, end users can be certain optimum effectiveness and More info procedure longevity.